:	Nov 21, 2006

:

The bushings must be replaced in pairs, LH and RH sides.

.

: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle.

.

Remove the wheels and tires.

.

Remove the LH lower arm.

.

Remove the RH lower arm.

.

Note the position of the bushing in relation to the lower arm.

.

: The bush flanges need to be removed to allow bush removal. :   Take note of the fitted position of the bush. Using a suitable tool, bend over the bush flanges.

.

Using a hacksaw, remove the flange from the bushing, making sure the upper arm is not damaged.

.

Using the special tools, remove and discard the lower arm rear bushings.

.

Using the special tools, remove and discard the lower arm front bushings.

.

: Make sure the bush is correctly aligned.   : Make sure the correct special tool is used to install the bushings to the correct depth. Using the special tools, install the lower arm front bushings

.

: Make sure the bush is correctly aligned. Using the special tools, install the lower arm rear bushings.

.

Install the LH lower arm.

.

Install the RH lower arm.

.

Install the wheels and tires.   Tighten the wheel nuts to 140 Nm (103 lb.ft).

.

Check the wheel alignment.